Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON ADLINE CS CF10 HP BK - PA666-CF - RadiciGroup High Performance Polymers

Material Data Center offers the following functions for RADILON ADLINE CS CF10 HP BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Radilon A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
PA6/66 copolymer 10% carbon fibre reinforced for 3D Printing Fused Deposition Modelling.

Suitable for parts requiring stiffness, high dimensional stability and very reduced shrinkage. The material offers good surface aspect and easy processability.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 3850 / - MPa ISO 527
降伏応力 65 / - MPa ISO 527
降伏ひずみ 3.5 / - % ISO 527
破壊呼びひずみ 18 / - % ISO 527
シャルピー衝撃強さ, +23°C 60 / - kJ/m² ISO 179/1eU
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 195 / * °C ISO 11357-1/-3
その他の特性.乾燥/調湿単位テスト基準
吸水率 9 / * % Sim. to ISO 62
吸湿率 2.6 / * % Sim. to ISO 62
密度 1160 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., Additive Manufacturing
納入形状.
顆粒., 黒
な特性
Copolymer
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
The material is available in granules or in filament – 1.75 mm and 2.85 mm diameter.
In the case of granules, the material is delivered in moisture-proof packaging ready for processing. Maximum recommended water content for best processing is 0.10%. Typical conditions with a desiccant drier: temperature 80 ° C, dew point -20 ° C or below, time 2-4 h or more. In the case of filaments, the material is originally sealed in vacuum bags with silica gel inside to keep environment in dry conditions. For best printing results, it is recommended to pre-dry the filament at 70-80°C for 2-4 h or more. Alternatively, Radilon® Adline filaments are compatible with Drywise system from Thought3D Ltd. 

Recommended 3D-Print processing parameters:
 
Nozzle Temperature Bed Temperature Adhesion promoter Print Speed
250°-280°C 70-100°C Magigoo glue 30-40 mm/s


Please note: Parameters are dependent on printer used.
Radici tests were performed on a Ultimaker S5 printer
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.